Variation; Fill-In; Metronome 3/4 - Sanchez SS-100 Owner's Manual

RHYTHM SECTION

VARIATION

FILL IN
FUNCTION
METRONOME
26
VARIATION - To select the a variation of the main patterns, press the
VARIATION button. The indicator will light up. If you press the
VARIATION button, then press the INTRO/ENDING button, the
variation pattern will play after the introduction.
FILL - IN - The fill feature will insert a short rhythmic pattern of one to two
measures in length, depending on the rhythm style selected and
the variation. Holding down the FILL IN button will extend the fill
indefinitely.
ASSIGNING THE SPLIT POINT FOR THE AUTO ACCOMPANIMENT -
The keyboard is split into two sections at the split point. The
default split point
key. A different split point for the auto accompaniment can be
assigned in the Function menu "Auto A.Split". Please see the
Function section of this manual for more information.
METRONOME -
If the rhythm accompaniment is not engaged, press the METRO-
NOME button to start the metronome, and press the button again
to stop it.
If the Rhythm accompaniment is playing the metronome sound
will replace the percussive rhythm sound immediately.
1. Press the METRONOME button to start the metronome. Its indica-
tor will light up and the "Metronome" menu will appear on the
display..
2. Use the +/YES or the –/NO button to choose the time signature to
choose the meter 2/4, 3/4, 4/4, 5/4, 6/4, 6/8 or 12/8 within 3
seconds after the metronome has been engaged .
3. Use the ACCOMP VOLUME slider to adjust the metronome vol-
ume and use the TEMPO +/- buttons to change the tempo of the
metronome.
for auto accompaniment section

Metronome 3/4

is the G2