Symbol LS4278 Quick Reference Manual page 14

Hide thumbs Also See for LS4278:

Table of Contents

NOTE If three scanners are actively connected to the cradle

(Multipoint-to-Point mode), a fourth scanner cannot connect

regardless of the pairing mode.

UNLOCKED PAIRING MODE (Default)

Pairing Methods

There are two pairing methods. The default method pairs (connects) the scanner

and cradle when the pairing bar code on the cradle is scanned. A second method

pairs the scanner and cradle when the scanner is inserted in the cradle. To enable

this feature, scan Enable Pair On Contacts below. With this feature enabled it is

not necessary to scan the pairing bar code on the cradle. If the pairing is

successful, a low/high connection beep sequence sounds a few seconds after the

scanner is placed in the cradle.

ENABLE PAIR ON CONTACTS

Carriage Return/Line Feed

To append a carriage return/line feed to all transmitted data, scan the following

bar codes in the order shown. To cancel this operation, the SET DEFAULTS bar

code on

page

8, or refer to the Product Reference Guide.

LOCKED PAIRING MODE

DISABLE PAIR ON CONTACTS (Default)

SCAN OPTIONS

Symbol LS4278

ENTER

Table of Contents