Lincoln Electric IM658-A Operator's Manual page 45

C-12
K590-6 WATER CONNECTION KIT
(FOR DRIVE ONLY)
Install per the instructions shipped with the kit.
K1536-1 WATER FLOW SENSOR
KIT
Install per the instructions shipped with the kit
K659-1 GAS GUARD REGULATOR
Adjustable flow regulator with removable adjuster key
for CO2 and Argon blend gases. Mounts onto feeder
inlet, and reduces gas waste and arc start "blow" by
reducing surge caused by excess pressure in supply
hose.
Install the 5/8-18 male outlet of the regulator to the
5/8-18 female gas inlet on the back panel of the wire
drive. Secure fitting with flow adjuster key at top.
Attach gas supply to 5/8-18 female inlet of regulator
per INSTALLATION section.
K1556-1 LIGHT DUTY CASTER KIT
This option provides 4 casters and all required hard-
ware to mount it to the Power Feed Wire Feeder.
ACCESSORIES
K1574-1 SECURITY DOOR (LARGE)
K1574-1 Security Door Installation into the Control
Box Cabinet
1. Turn off power.
2. Unlatch and swing open the small door. Remove
the two screws from the horizontal hinge rod.
Save the screws.
3. While holding the door so it doesnʼt fall, Slide the
rod out sideways releasing the door.
4. Position the new door between the panel holes
and re-install the rod so the screw holes can be
accessed.
5. Replace the two screws and tighten.
6. Swing the door into the up position. A lock may
be installed through the side holes for security
purposes.
K1555-2 INSULATED LIFT HOOK
For applications where an insulated lift hook is
required. This kit provides an easily installed, heavy
duty insulated lift eye that mounts to the wire reel
stand mast. See the instructions provided with the kit
for installation.
K1551-2 INCOMING BUSHING
(4 Ball Roller) (Standard on codes
10600 and up)
This ball bearing equipped incoming bushing can be
used in place of the standard incoming wire bushing,
when feeding solid steel or cored wire electrodes. It
significantly reduces any abrasion to the electrode
wire where it enters the feed head. This results in
even smoother, more trouble free operation.
POWER FEED 10 DUAL
C-12