Sanyo PLC-XU116 Service Manual page 17

Mechanical Disassembly
5. Power, Ballast, SW Board, Thermal Sw(SW902) removal
1. Remove two Isolation sheets.
2. Remove 2 screws A(T3x6) and 2 screws B(T3x8) to remove the Power
board holder.
3. Remove screw C(T3x6) to remove the Power board.
4. Remove 2 screws D(T3x6) to remove the Ballast board.
5. Remove screw E(T3x6) to remove the SW board and remove screw F(T3x6)
to remove the thermal switch (SW902).
D
Power board
Ballast board
B
Power board holder
A (T3x6)x2
Isolation sheets
C (T3x6)
D (T3x6)x2
B (T3x8)x2
SW board
E (T3x6)
F (T3x6)
A
-17-
Themal switch
(SW902)
Fig.5