Steering The Wheelchair With The Remote - Invacare A-Series User Manual

1.6

Steering the wheelchair with the remote

•
Switch on remote (ON/OFF key). The displays on the remote illuminate. The wheelchair is
ready to drive.
• Adjusting the driving speed (keys for adjusting driving speed - see section "Remote
construction" on page 7).
Can the electronic system programming be adapted?
The electronic controller is programmed with standard values during manufacture. Your
Invacare® dealer can carry out programming tailored to fit your requirements.
WARNING: Any alteration to the drive programme can influence vehicle handling and the
tipping stability of the electric vehicle!
• Alterations to the drive programme may only be carried out by trained Invacare® dealers!
• Invacare® supplies all electric vehicles from the factory with a standard drive programme.
Invacare® can only assume a warranty for the safe vehicle handling of the electric vehicle –
in particular tipping stability - for this standard drive programme!
Will the wheelchair not drive after switching on?
Check the drive-away lock (see chapter "Activating / deactivating the drive disabler" on page
12) and the status bar indicator (see chapter " Status display" on page 12.).
13