Disassembly; Rear Cover Removal; Front Control Module Removal; Chassis Removal And Refitting - Sony KD-28DX50U Service Manual

2-1. Rear Cover Removal

=>
=>
=>
= >
Remove the rear cover fixing screws indicated and pull the
rear cover carefully backwards.

2-3. Chassis Removal and Refitting

To remove lift the main bracket rear slightly and slide the
chassis away from the beznet. Ensure that the interconnecting
leads are released from their purse locks to prevent damage
being caused.
SECTION 2

DISASSEMBLY

2-2. Front Control Module Removal

Remove the two screws fixing the user control module to the
front underside of the set. The control module drops down to
allow access to the boards.
When refitting the chassis ensure that the main
bracket is located in the beznet guide slots before
sliding the chassis forwards. Refit the
interconnecting leads in their respective purse locks.
- 14 -
Screws