How To Switch Camera Mounts - YUNEEC GB200 Quick Start Manual

Control Board
Cover
Pitch Axis
Arm
HOW TO SWITCH CAMERA MOUNTS: CGO1™ to GoPro3/3+® (A)
Step 1: Rotate the CGO1™ camera mount - as shown in illustration
A - until the at spot inside the setscrew hole is facing up, and
loosen the setscrew using the allen wrench.
Step 2: Carefully remove the CGO1™ camera mount by sliding it
outward away from the gimbal motor and remove the gyro board
from the gyro board mount.
Step 3: Insert gyro board into the gyro board mount on the GoPro®
camera mount, and wrap the gyro board wire harness clockwise
one whole turn around the end of the camera mount toward the
gimbal motor.
Gyro board
GoPro® Camera
Gimbal Mount
6
GoPro® Camera
Mounting Sleeve