YUNEEC CGO SteadyGrip V3 User Manual

INTRODUCTION
The CGO SteadyGrip™ is a ground handle designed to extend the CGO3 3-axis gyro
stabilized camera from the sky to the ground, allowing you to capture amazing
action shots easier than ever before. The camera pitch controller allows precise
camera angle control on the go using your mobile device as a display. The Steady-
Grip's ergonomic design is capable of holding up to a 6.4 inch mobile device.
The SteadyGrip™ paired with Yuneec's CGO3 Full-HD 3-Axis Stabilized Gimbal
Camera System allows you to capture fluid footage right out the box. Please take
the time to read through this entire instruction manual for more information on
safety, battery charging, camera controls and more before filming your first hit
video. Please also visit www.Yuneec.com for additional information including
product updates, bulletins, videos and more.
CGO3 (available separately) is an innovative combination of 3-axis brushless
gimbal, camera and digital video downlink.
The Self-Stabilizing gimbal makes it possible to capture amazing photographs and
video footage for an array of uses. And the built-in digital video link delivers
streaming video to 5.8GHz WiFi compatible iOS® and Android™ equipped devices
including smart-phones and tablets as well as YUNEEC Personal Ground Stations.
WINDOWS SYSTEM
REQUIREMENTS
Windows XP (Service Pack 2 or later)
or Vista
3.2GHz Pentium 4 or faster
Minimum 4GB of system RAM
CGO3 APP COMPATIBLE DEVICES
Android:
Mobile Devices with 5.8GHz Support
SPECIFICATIONS
STEADYGRIP™
Height: 223mm (8.78 in)
Depth (front to back): 182mm (7.17 in)
Width: 70mm (2.76 in)
Weight (without gimbal/batteries): 200g (7.05 oz)
Angle Control Range (Pitch): 30° to -85°
Required Batteries: 2850mAh Energizer® 8x 1.5V AA Batteries
(Sold Separately)
Runtime: 48-64 minutes (depending on usage)
CGO3
Dimension: 4.2x5.0x3.1in (106x128x80mm)
Weight: 6.9oz (195g)
Sensor: 1/2.3" CMOS
Effective Pixels: 12.4 Megapixels
Camera lens: 0.6in (14mm)/F2.8（1.4in/35mm）
FOV: 115 Degree
Electronic Shutter: 1/30 —— 1/8000
Working Temperature: 0-40℃
Power Consumption: 10W
Video Transmission Range: Up to 400m (1312ft)
Transmission System: 5.2Ghz — 5.8Ghz
Video UHD: 4K 30FPS
NOTICES AND WARNINGS
IMPORTANT NOTE: All safety precautions and warnings, instructions, warranties
and other collateral information is subject to change at the sole discretion of
Yuneec. For the most up-to-date information please visit the corresponding
product page at www.Yuneec.com or contact the nearest Yuneec office or
authorized distributor.
The following special language terms are used throughout the product literature to
indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of property
damage and/or little to no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of
property damage and/or a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of
property damage, collateral damage and/or serious injury or create a high probability
of superficial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the
features of the product before operating. Failure to operate the product correctly
can result in damage to the product, property and/or cause serious injury.
WARNING: This is a sophisticated consumer product. It must be operated with
caution and common sense, and requires some basic mechanical ability. Failure to
operate this product in a safe and responsible manner could result in damage to the
product, property and/or cause serious injury. This product is not intended for use
by children without direct adult supervision. Do not use with incompatible
components or alter this product in any way outside of the instructions provided by
Yuneec. The instruction manual contain instructions for safety, operation and
maintenance. It is essential to read and follow all the instructions and warnings
prior to assembly, setup and/or use in order to operate the product correctly and
avoid damage or serious injury.
AGE RECOMMENDATION: NOT FOR CHILDREN UNDER 14 YEARS. THIS IS NOT
A TOY.
GENERAL SAFETY PRECAUTIONS AND WARNINGS
WARNING: Failure to use this product in the intended manner as described in
instruction manual can result in damage to the product, property and/or cause
serious injury. This product is not a toy! If misused it can cause serious bodily harm
and damage to property.
WARNING: As the user of this product you are solely and wholly responsible for
operating it in a manner that does not endanger yourself and others or result in
damage to the product or the property of others.
Always allow CGO3 and SteadyGrip™ to initialize properly by setting the Steady-
Grip™ on a flat and stable surface prior to switching it on and allowing the Steady-
Grip™ and CGO3 to initialize properly which sometimes takes about 4-8 seconds.
Always operate your SteadyGrip™ in a respectful and safe manner.
Do not attempt to operate your equipment in areas with potential magnetic and/or
radio interference including areas nearby broadcast towers, power transmission
stations, high voltage power lines, etc.
OVERVIEW
SteadyGrip™ Action Ground
Handle for CGO Series Camera
1. CGO3
2. Main Status LED
3. Pitch Control Roller Wheel
4. Pitch Follow Button
5. Rubberized Ergonomic Grip
6. On/Off Switch
7. 8x AA Battery Compartment
BATTERY WARNINGS AND USAGE GUIDELINES
WARNING: Alkaline Batteries May explode or leak, and cause burn injury if
recharged, disposed of in fire, mixed with a different battery type, inserted
backwards or disassembled. Replace all batteries at the same time. Do not carry
batteries loose in your pocket or purse. Do not remove the battery label.
WARNING: All instructions and precautions must be read and followed exactly
and you must follow instructions of the battery manufacturer.
WARNING: procedures, which if not properly followed, create the probability of
TM
MAC SYSTEM
REQUIREMENTS
Mac OS® X 10.4.11 or later
2.0GHz Intel Core Duo or faster
Minimum 4GB of system RAM
Apple iOS:
iphone 5/5c/5s/6/6 Plus
ipad mini/mini+/3/4
V3
property damage, collateral damage and serious injury or create a high probability
of superficial injury.
Failure to exercise care while using this product and comply with the following
conditions and guidance could result in product malfunction, excessive heat, fire,
property damage, and ultimately injury.
Lithium lon batteries are not toys. For the purpose of the document Li-lon, Li-Po,
Li-Fe, NiCd or NiMH batteries will be described as "Batteries".
Handling and Storage:
● Never alter, puncture or impact Batteries or related components.
● Do not directly connect the terminals with metal objects. This will short-circuit
Batteries, resulting in heat and electrical discharge.
● Never store loose Batteries together, the Batteries' terminals may contact one
another causing a short circuit.
● Never expose Batteries to extreme temperatures or direct sunlight.
● Always disconnect Batteries when not in use.
Before the First Charge:
● Ensure batteries are not damaged, as this may cause a short circuit of fire.
● Always refer to your charger's manual to ensure safe operation.
● Always charge Batteries in an open area away from flammable materials, liquids and surfaces.
● Never charge Batteries that are hot to the touch (above 120°F)
● Never make wrong polarity connection when charging and discharging battery
packs. Always double check polarity of battery's connector to make sure red wire to
red wire and black wire to black wire.
● Please always use a smart charger (with automatic power cut-off function ) to
charge NiMH battery；charging NiMH battery without an attention may cause
battery explode.
● When charging NiMH battery, please always put the battery in a water-proof
place to avoid any accident happen.
● For larger battery pack (10Ah or larger ) , please always use a smart charger with
temperature sensor to avoid over heating which may cause the accident. NiMH
batteries have higher energy than NiCd battery, but they have higher self discharg-
ing rate and shorter shelf life. Therefore, please always keep NiMH cells / battery
pack in charged condition after using or before storing them.
● Suggest you charging NiMH batteries and packs at least every six months,
otherwise NiMH battery will reduce capacity or dead. For safety reason, NiMH
battery is usually shipped without fully charged. You must charging NiMH battery
before use, and allow 3-5 cycles of charging and discharging for battery capacity to
recover.
Additional Guidelines and Warnings:
● In the event of a crash, always quickly and safely disconnect and remove Batteries
from the model. Then follow the previously listed safety procedures.
● If the internal contents of Batteries come into contact with your skin, wash the
affected area(s) with soap and water immediately. If it comes into contact with your
eye(s), flush them with generous amounts of water for 15 minutes and seek
immediately medical attention.
INSTALLING THE AA BATTERIES
WARNING: Alkaline Batteries May explode or leak, and cause burn injury if
recharged, disposed of in fire, mixed with a different battery type, inserted
backwards or disassembled. Replace all batteries at the same time. Do not carry
batteries loose in your pocket or purse. Do not remove the battery label.
STEP 3) Re-installing the Battery Cover / Door on the bottom of the SteadyGrip™
Once you've installed 8 fresh AA batteries, Hold the bottom of the SteadyGrip™
toward yourself with the front part facing downward. Slide the battery cover / door
downward with slight force and ensure you hear and feel a noticeable 'click'
indicating the battery cover / door has been closed securely.
ATTACHING THE CGO3 TO THE STEADYGRIP™
WARNING: Before switching on the SteadyGrip™ it is highly recommended to first
securely attach the CGO3 to your SteadyGrip™.
QUICK TIP: It's a good idea to ensure you have your microSD card with lots of
space for photos and videos handy.
STEP 1) Remove the protective cover for the contactor as illustrated.
STEP 2) Carefully slide the top part of the CGO3 (that also attaches below the
nose of the TYPHOON) onto the mount below the front part of the SteadyGrip™.
A corresponding 'click' will be noticed once the CGO3 has securely been installed
into the slide-in mount on the SteadyGrip™.
STEP 3) Insert a microSD card into the corresponding slot on the bottom of the
CGO3. You can use the included 16GB card (from your RTF package) or any Class
10 microSD card up to 128GB.
STEP 4) Powering on and initialization. Place your SteadyGrip™ on a flat and
stable surface, then switch on the SteadyGrip™ and it will initialize after 4-8
seconds of no movement or vibration.
SteadyGrip™ Main LED Status:
Upon Powering on: GREEN LED blinking for twice
and then solid GREEN
Low Voltage Warning: RED LED blinking slowly
Power Cut-off: RED LED blinking quickly
Pitch Follow Function on: GREEN LED solid
Pitch Follow Function off: GREEN LED blinking
CGO3 APP
Download the free APP
named as CGO3 to smart
device at the APP Store or
Google Play Store.Install the
APP to your 5.8GHz WiFi
capable device.Make a note
of the network name and
password located on the top
of the gimbal assembly.
CGO3 APP COMPATIBLE DEVICES
Apple iOS: iphone 5/5c/5s/6/6 Plus ipad mini/mini+/3/4
Android: Mobile Devices with 5.8GHz Suport
USER MANUAL
STEP 1) Remove the Battery Cover / Door
from the bottom of the SteadyGrip™
Hold the bottom of the SteadyGrip™ toward
yourself with the front part
downward. Slide the battery cover / door
upward with slight force and inspect the AA
battery compartment.
STEP 2) Install 8x AA Batteries
The use of rechargeable batteries is strongly
recommended. Alkaline batteries
support the device to work 15 minutes.
17:24:12
WB
ISO 32
1/250s
facing
only
N/A