Assembly - Branx Fitness CARDIO PRO 4400 User Manual

PART LIST - MODEL No. GV4400
Before continuing, please take a moment to look at the drawing below and
familiarise yourself with the parts that are labelled.
Key Qty. Description Key Qty.
No. No.
1 1 Hand rail welding part 11 1
2 1 Hand rail welding part
3 1 Right holder (right arm) 12 1
4 1 Left holder (left arm) 13 1
5 1 Middle holder
6 1 Motor cover 14 2
7 1 The moving frame of 15 1
the motor 16 1
8 2 Rubber pad 17 1
9 2 Wheel 18 1
10 1 The under cover of the 19 1
motor 20 2
Description Key Qty. Description
No.
The frame of the 21 1 Running deck
incline motor 22 1 Motor control board
Gas spring 23 1 Incline motor
The holder near to the 24 2 Tube stopper
gas spring 25 1 Front roller
Wheel 26 1 Motor
Rear roller 27 2 Handrail tube stopper
End cap-left 28 2 Hand rail
End cap-right 29 2 Hand rail heart rate
Treadmill frame sensor
Running belt 30 1 Computer case
Side rail 31 1 Display control board
Page 8 www.branxfitness-helpdesk.co.uk

ASSEMBLY

Assembly requires two people. Please follow each step carefully below, be careful
of your hands at all times and when lifting ensure your fit and healthy enough to
do so and always have assistance, watch that back to : ) by following our step by
step instructions this should limit the risk of possible injury, please do not ignore any
steps as this could result in personal injury and damage to the treadmill.
• Your treadmill will arrive boxed and secured by safety carton straps.
Please ensure your treadmill is placed on a firm flat surface and that all
sides of the treadmill are accessible with a minimum clearance of 40cm.
Once you have assembled the treadmill it can be moved as required.
• Cut and discard packaging safety carton straps.
• Remove inner packaging and all contents (box with training weights, oil
and any fitments etc)
• Using a minimum of 2 people carefully remove the treadmill from the
packaging carton using recommended lifting areas.
• STORE ALL TREADMILL PACKAGING IN A SAFE PLACE PLEASE. IT IS
RECOMMENDED THAT THE PACKAGING IS RE-USED IF THE TREADMILL
IS EVER MOVED SIGNIFICANTLY FROM ITS PRIMARY LOCATION.
Now your treadmill should be safely out of its box and ready for you to assemble,
the below detailed steps will help you assemble your treadmill safely, please follow
each step carefully.
Page 9 www.branxfitness-helpdesk.co.uk