Table of Contents
Advertisement
8. The "Music" button
Simply plug in your music player using your MP3 connector cable (See pictures
below) provided and press the "Music" button to activate the speakers. Please
note that an adaptor (not supplied) may be required for some music player
devices. Use your music player device to control your song choices and volume.
9. Safety Cut Off Chord
It is not possible to operate your treadmill unless the red magnetic Safety Cut-
Off Chord (See picture below) is in position on the treadmill console. Whilst in
"Operational Mode" removal of the red magnetic Safety Cut-Off Chord will stop
the motor, which will slow/stop the running belt.
10. When you are finished exercising, remove the Safety Chord
Step onto the foot rails and press the start/stop button. Next, change the incline of
the treadmill to the lowest setting. The incline must be at the lowest setting when
the treadmill is folded to the storage position or the treadmill will be damaged.
Remove the Safety key from the console and put it in a secure place.
Finally, move the on/off switch to the off position (See diagram on page 16) and
unplug the power cord (See instructsion on page 14).
Page 18
www.branxfitness-helpdesk.co.uk
COMPUTER FUNCTION
1
Incline (it displays your auto incline range from 0-20%)
2
Distance (it displays your distance travelled from 0 upto 99km)
3
Time (it displays your time from 0 to 99minutes)
4
Speed (it displays your current speed of travel from 1 to 20km/h)
5
Calories (it displays the calories consumed from 0 to 999)
6
Pulse (it displays your pulse rate readout)
7
On/Off (Under "Ready Condition" press this key and the treadmill will run at a speed of 1km/h. If the
speed is greater then 3.5km/h and this button is pressed the treadmill will slow down and then stop.
During this stopping process other keys will not be made available to the user. If the speed is less then
3.5km/h and this button is pressed the treadmill will stop immediately).
8
Incline up (it displays your current gradient of the running deck 0-20%)
9
Incline down (it displays your current gradient of the running deck 0-20%)
10
Set (under "Ready Condition" press this key once and it will clear all of the operations. In "Ready
Condition" press and hold the "Set" button for 3 seconds to manually programme Time, Distance or
Calorie targets. In addition pressing the "Clear" button under any other conditions (with the treadmill
belt static) will return to "Ready Condition". Use the "Speed" up/down buttons to change values in each
window. Once you have set from one of these 3 available options simply press the "On/Off" button and
the set figures will be counted down accordingly.
11
Clear (Press and hold this key and all recorded data will be cleared)
12
Incline short cut keys (Incline Shortcut Keys 3, 6, 9 and 12. Press any incline shortcut key whilst in
"operational Mode" to move the incline directly to the selected gradient)
13
Speed down (Press this and the speed will reduce in increments of 0.1km/h)
14
Speed up (Press this and the speed will increase in increments of 0.1km/h)
15
Music (Simply plug in your music player using your MP3 connector cable provided and press the
"Music" button to activate the speakers. Please note that an adaptor (not supplied) may be required for
some music player devices. Use your music player device to control your song choices and volume.
16
Mode (Whilst in "Ready Condition" press the "Mode" button to select from one of your treadmills 99
different training programmes)
17
Speed short cut key (Speed Shortcut Keys 3, 6, 9 and 12. Press any speed shortcut key whilst in
"operational Mode" to move the speed directly to the selected value in km/h.
18
Safety key (Whilst in "Operational Mode" removal of the red magnetic Safety Cut-Off Chord will stop the
motor, which will slow/stop the running belt)
Page 19
www.branxfitness-helpdesk.co.uk
Hide quick links:
Advertisement
Table of Contents
