ASA Electronics Flight Timer Instruction Manual page 9

Fig 5 — Fuel timer display
Countdown Operation
Countdown operation can be used to time the
interval between events. A beeping alarm, flashing
icons and backlight notify the user that time has
elapsed.
If timer is running press START/STOP to stop
◆
timer.
Press RESET to zero timer as shown in Fig 5.
◆
Push DIAL. The hour digits will flash.
◆
Rotate DIAL to set hours.
◆
Push DIAL. The minute digits will flash.
◆
Rotate DIAL to set minutes.
◆
Push DIAL. The second digits will flash.
◆
Rotate DIAL to set seconds.
◆
◆ Push DIAL to save.
Fuel Timer Alarm
When the fuel timer counts down to zero the Flight
Timer sounds an audible and visible alarm then
begins to count up, measuring the time since the
alarm. If fuel mode is active, the hour, minute and
second digits flash. If another mode is active, the
"FUEL" icon flashes to indicate a fuel timer alarm.
The audible alarm and flashing backlight cease after
10 seconds or when the alarm is canceled.
9