Note/Scratchpad Function - ASA Electronics Flight Timer Instruction Manual

flashing backlight cease after 10 seconds or when
the alarm is canceled.
Canceling the Approach Timer Alarm
If a mode other than approach is active, press
◆
the APPROACH button.
◆ Press START/STOP to stop flashing digits.
Time since alarm is maintained on screen.
◆
Recalling Stored Approach Times
Important — To retrieve a saved approach time
after the timer has been stopped follow these steps:
Do NOT press RESET as this will clear the
◆
memory location.
Rotate DIAL to scan to the next approach time.
◆
Rotate DIAL back to the original approach time.
◆
Original approach time data will appear.
◆

Note/Scratchpad Function

The Flight Timer includes a 5-digit numeric note
displayed in the upper right corner of the LCD.
Use it as a scratchpad for remembering important
flight numbers such as approach altitudes, frequen-
cies, or squawk codes. This note is always displayed
and can be accessed from any mode as follows:
Press NOTE. The two highest digits will flash.
◆
Rotate DIAL to set first two digits.
◆
Push DIAL. The hundreds digit will flash.
◆
Rotate DIAL to set the hundreds digit.
◆
Push DIAL. The tens digit will flash.
◆
Rotate DIAL to set the tens digit.
◆
Push DIAL. The ones digit will flash.
◆
Rotate DIAL to set the ones digit.
◆
Push DIAL to accept note.
◆
◆ Also, pressing NOTE at any time while setting
will accept the current note value.
13