Approach Timer Function - ASA Electronics Flight Timer Instruction Manual

Approach Timer Function

The Flight Timer includes an approach timer
function to time approach intervals. For
convenience, multiple approach times can be
programmed prior to flight. Features include:
Count-up or countdown operation.
◆
Up to 59-minute 59-second timer.
◆
Stores 6 home (H) airport approach times.
◆
Stores 6 destination (D) airport approach times.
◆
Audible and visible countdown alarm.
◆
Operates independently of other timers and
◆
clock.
The "APPROACH" icon appears in the upper
portion of the display when approach mode is
active. If a different mode is active, press the
APPROACH button to display the approach timer.
Selecting an Approach Time
There are 12 approach times stored in memory. Six
are labeled H1, H2, H3, H4, H5, H6 and six are
labeled D1, D2, D3, D4, D5, D6. Rotate the DIAL
to view these one at a time. In a new timer, they
will all be zero.
Count-up Operation
Count-up operation can be used to track the
duration of events. No alarm will sound when
counting up.
If timer is running press START/STOP to stop
◆
timer.
Press RESET to zero timer as shown in Fig 7.
◆
Press START/STOP to start timer. Seconds will
◆
begin to count up.
Press START/STOP to stop timer.
◆
11