Lincoln Electric LN-25 PRO DUAL POWER Operator's Manual page 18

A-9
CV Power Source with Twist-Mate Connectors and
no Remote/Local Switch. (See Figure A.9)
CV-250
CV-300
Place CV/CC switch in the feeder in the "CV" position.
CONTROL CABLE SET-UPS
CV Power Source with 24-42 VAC
(See Figure A.10)
CV Power Source
CV-305
VANTAGE 300, 400, 500
CV-400
RANGER 250, 305
CV-655
ENGINE DRIVE WITH
DC-400
WIRE FEED MODULE
DC-655
SAE's WITH K385-2
V-350
V-450
WARNING
• When the wire feeder is connected to the power source with the control cable, the
contactor in the wire feeder is always closed and the wire drive and the gun may be at
welding potential.
If present, place the power source
Remote/Local Switch in the Remote posi-
tion.
Place CV/CC switch in the feeder in the
"CV" position.
INSTALLATION
FIGURE A.9
Jump er
LN-25™ PRO DUAL POWER
Electrode
Work
See Magnum Literature
FIGURE A.10
Control Cable
LN-25™ PRO DUAL POWER
Electrode
Work
ELECTRIC SHOCK CAN KILL.
K#
K2614-6, -8
KP1695-XX
KP1696-XX
KP1697-XX
K1797-xx
K2335-1
See Magnum Literature
KP1803-XX
K852-95
LN-25™ PRO DUAL POWER
Wor k clip
K#
K2614-6, -8 LN-25™ PRO Dual Power,
PRO Dual Power European
KP1695-XX
KP1696-XX
KP1697-XX
CV power Source
K1841-XX
K852-95 Twist-Mate Cable Plug
K484
Description
LN-25™ PRO Dual Power,
PRO Dual Power European
Drive Roll Kit
Control Cable
Adapter for Competitive Power Sources
Welding Gun
CV power source
Welding Cables
Twist-Mate Cable Plug
A-9
Description
Drive Roll Kit
Welding Gun
Welding Cables
Jumper Plug kit