Kyocera TASKalfa 3050ci Operation Manual page 415

LDAP Security
Select the communication protocol according to the type of security employed by the LDAP server. The default
setting is Off.
NOTE:
LDAP must be set to [On] in Protocol Detail on page 9-100.
The table below shows the available settings.
Item
Off
SSL/TLS
STARTTLS
* You can change the port number using Command Center RX.
Use the procedure below.
1
Press the System Menu key.
2
Press [System], [Next] of Network, [
3
Press [Off], [SSL/TLS] or [STARTTLS].
4
Press [OK].
SMTP Security
Select the communication protocol according to the type of security employed by the SMTP server. The default
setting is Off.
NOTE:
SMTP must be set to On in Protocol Detail on page 9-100.
The table below shows the available settings.
Item
Off
SSL/TLS
STARTTLS
* You can change the port number using Command Center RX.
Do not use security employed by the LDAP server.
Encryption is applied any data communication. To enable LDAP security, the
LDAP port may have to be changed according to the server settings.
Typically, 636* for SSL/TLS is well-known LDAP port.
Encryption is applied any data communication. Typically, 389* for
STARTTLS is well-known LDAP port.
], [Next] of Secure Protocol, and then [Change] of LDAP Security.
Do not use security employed by the SMTP server.
Encryption is applied any data communication. To enable SMTP security,
the SMTP port may have to be changed according to the server settings.
Typically, 465* for SSL/TLS is well-known SMTP port.
Encryption is applied any data communication. Typically, 25* or 587* for
STARTTLS is well-known SMTP port.
9-105
Default Setting (System Menu)
Description
Description
9