Kyocera TASKalfa 3050ci Operation Manual page 329

Color Selection (Copy)
Select the default copying color mode setting. The available default settings are shown below.
Color mode
Auto Color
Full Color
Black & White
Use the procedure below to select the default color mode setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default color setting.
4
Press [OK].
Color Selection (Send/Store)
Select the default color mode for scanning documents. The available default settings are shown below.
Color mode
Auto Color (Color/Gray)
Auto Color (Color/B & W)
Full Color
Grayscale
Black & White
Use the procedure below to select the default color mode.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default color mode.
4
Press [OK].
Automatically recognize whether documents are color or black
and white.
Scan document in full color.
Scan document in black and white.
], [Next] of Function Defaults and then [Change] of Color Selection(Copy).
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Grayscale.
Automatically recognize whether the document is color or black
and white, and scan color documents in Full Color and black and
white documents in Black and White.
Scan document in full color.
Scan document in grayscale for smoother and finer finish.
Scan document in black and white. File size is smaller than Full
Color or Grayscale.
], [Next] of Function Defaults and then [Change] of Color Select.(Send/Store).
9-19
Default Setting (System Menu)
Description
Description
9