Panasonic KX-FP205C Operating Instructions Manual page 49

9.3.7 Answering machine (KX-FP215 only)
Problem
I cannot listen to messages
from a remote location.
The other party complains
that they cannot leave a voice
message.
Call Display information does
not display during message
playback.
9.3.8 If a power failure occurs
L The unit will not function.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L If delayed transmission (feature #25 on page 38) is programmed and a power failure prevents the document from
being sent at the set time, the document will be sent after power is restored.
L If any fax documents are stored in the memory, they will be lost. When power is restored, a power down report will
be printed stating which documents in memory have been erased.
Cause & Solution
L Press the remote operation ID (code) correctly and firmly (feature #11 on
page 37).
L The unit is not in TAM/FAX mode. Change to TAM/FAX mode (page 34).
L You may have subscribed to a voice mail service due to service packs
offered by your telephone company. Fax and voice message (KX-FP215
only) reception may not be possible when voice mail is activated so we
recommend you to:
– contact your telephone company and request to deactivate voice mail
service, or
– subscribe to a Distinctive Ring service (page 28).
L The recording time is set to "GREETING ONLY". Select "1 MINUTE", "2
MINUTES" or "3 MINUTES" (feature #10 on page 36).
L The memory is full. Erase unnecessary messages (page 33).
L Make sure there is no other answering machine connected on the same
line.
L The caller information will not be displayed if a message is recorded by
using {MEMO} (page 33).
9. Help
49