Table of Contents
Advertisement
8. Programmable Features
Feature
Changing the fax
activation code
Setting the memory
reception alert
Setting friendly
reception
Setting the voice
guidance (KX-FP215
only)
Selecting the language
Changing the recording
time for your TAM/FAX
greeting message (KX-
FP215 only)
Setting the incoming
message monitor (KX-
FP215 only)
Setting flash time
40
Feature code
Selection
If you wish to use an extension telephone (page 24) to receive
{#}{4}{1}
faxes, activate this feature and program the activation code.
{0} "OFF" (default)
{1} "ON"
1. {MENU} i {#}{4}{1}
2. Press {1} to select "ON". i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
4. {SET} i {MENU}
To alert you with a beeping sound when a received fax document
{#}{4}{4}
is stored into memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
To receive a fax automatically when you answer a call and hear a
{#}{4}{6}
fax calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
If you wish to hear voice guidance, activate this feature.
{#}{4}{7}
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear the friendly reception voice guide,
pre-recorded messages and voice time/day stamp.
The display and reports will be in the selected language.
{#}{4}{8}
{1} "ENGLISH" (default): English is used.
{2} "FRENCH": French is used.
{1} "16s" (default): Maximum recording time is 16 seconds.
{#}{5}{4}
{2} "60s": Maximum recording time is 60 seconds.
See page 32 for details.
To hear an incoming message (ICM) from the speaker when the
{#}{6}{7}
answering machine is recording the message.
{0} "OFF"
{1} "ON" (default)
The flash time depends on your telephone exchange or host PBX.
{#}{7}{2}
{1} "700ms" (default)
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "110ms"
{7} "100ms"
{8} "90ms"
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
L The default code is ";#9".
Advertisement
Table of Contents
