Source Button; Number Buttons; Reset Button - Sony CDX-GT800D Operating Instructions Manual

H Z (eject)/ANGLE button 5
To eject the disc/slide down the front panel
(press); angle the front panel in 3 positions
(press and hold).
I
(front panel release) button 4
J SOURCE button
To power on/change the source (Radio/CD/
MD* 2 /AUX).
K Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD* 2 :
(1): REP 8, 18
(2): SHUF 8, 18
(6): PAUSE*
3
To pause playback. To cancel, press again.
L RESET button 4
M AF (Alternative Frequencies)/TA
(Traffic Announcement) button 10
To set AF and TA/TP in RDS.
N Receptor
To receive signals from the card remote
commander.
O IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t normal play/reception
mode
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qh ENTER button
To complete a setting.
qj </, (SEEK –/+) buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
qk DSPL (display)/PTY (Programme
Type) button 8, 10
To change display items; to select PTY in
RDS.
ql VOL (volume) +/– button
To adjust volume.
w; ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wa SOUND button
To select sound items.
ws LIST button 9, 18
To list up.
wd M/m (+/–) buttons
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
wf SCRL (scroll) button 8
To scroll the display item.
*1 When a CD/MD changer is connected.
*2 When an MD changer is connected.
*3 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 21.
7