Using Optional Equipment; Cd/Md Changer - Sony CDX-GT800D Operating Instructions Manual

Dimmer
To change the brightness of the display.
– "Auto" ( ): to dim the display automatically
z
when you turn lights on.
– "on": to dim the display.
– "off": to deactivate the dimmer.
Auto Scroll
To scroll long displayed item automatically
when the disc/group/track/album is changed.
– "off" ( ): to not scroll.
z
– "on": to scroll.
RECEIVE MODE
Local (Local seek mode)
– "off" ( ): to tune normal reception.
z
– "on": to only tune into stations with stronger
signals.
Mono (Monaural mode)*
To improve poor FM reception, select monaural
reception mode.
– "off" ( ): to hear stereo broadcast in stereo.
z
– "on": to hear stereo broadcasts in monaural.
Regional*
2
To set "off" or "on" ( ) (page 10).
z
BTM (page 8)
SOUND
HDEQ (page 13)
DSO 3D (page 14)
I-TA (page 14)
Front HPF (High Pass Filter)
To select the front speaker cut-off frequency:
"off" ( ), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
Rear HPF (High Pass Filter)
To select the rear speaker cut-off frequency:
"off" ( ), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
( ), "63Hz," "78Hz," "100Hz," "125Hz" or
z
"160Hz."
BBE MP (page 2)
Loudness
To allow you to listen clearly at low volume
levels.
– "on": to reinforce bass and treble.
– "off" ( ): to not reinforce bass and treble.
z
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 18).
2
LIST
When the radio or CD/MD changer is used, the
station frequency, or CD/MD number/track
name is displayed.
PTY*
2
You can tune to a station by selecting the desired
programme type.
*1 When the unit is turned off.
*2 When FM is received.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number, MP3 indication*
LP2/LP4 indication*
Disc/Album number
Playback starts.
*1 When MP3 is played.
*2 When MDLP disc is played.
Skipping discs
1 During playback, press (ENTER) until
"DISC" appears.
2 Rotate the SEEK control dial until the desired
disc appears.
Skipping albums and discs with the
card remote commander
1 During playback, press M or m.
To skip Press M or m.
album and release (hold for a
moment).
album within 2 seconds of first
continuously releasing.
discs repeatedly.
continue to next page t
1
2
17