Reset Button; Disc Slot; Source Button; Number Buttons - Sony CDX-GT500 Operating Instructions Manual

H GP*
1 /ALBM* 2 +/– buttons*
To skip groups/albums (press); skip groups/
albums continuously (press and hold).
I SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
J DSPL (display) button 8
To change display items.
K SENS/BTM button
To improve weak reception: Local/Mono
(press); start the BTM function (press and
hold).
L SOURCE button
To power on; change the source (Radio/CD/
MD* 4 /AUX).
M MODE button 8, 12
To select the radio band (FM/MW/LW)/
select the unit* 5 .
N AF (Alternative Frequencies)/TA
(Traffic Announcement) button 9
To set AF and TA/TP in RDS.
O Number buttons
CD/MD* 4 :
(3): REP 8, 12
(4): SHUF 8, 12
(5): BBE MP*
6 3
To activate the BBE MP function, set
"BBE MP on." To cancel, set "BBE MP
off."
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
P EQ3 (equalizer) button 11
To select an equalizer type (Xplod, Vocal,
Edge, Cruise, Space, Gravity, Custom or
Off).
Q IMAGE button 2
To select the display image.
Movie mode 1-3 t Spectrum analyzer
mode 1-5 t Space Producer mode t Wall
paper mode 1-3 t Normal play/reception
mode
R RESET button 4
3
S Z (eject) button 5
T Disc slot 5
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
wa < (.)/, (>) buttons
ws VOL (volume) +/– button
wd ATT (attenuate) button
wf SEL (select) button
wg M (+)/m (–) buttons
wh SCRL (scroll) button
wj Number buttons
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
*3 If the changer is connected, the operation is
different, see page 12.
*4 When an MD changer is connected.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 15.
To eject the disc.
To insert the disc.
To control CD/radio, the same as (SEEK)
–/+ on the unit.
To adjust volume.
To attenuate the sound. To cancel, press
again.
The same as the select button on the unit.
To control CD, the same as (GP/ALBM) +/–
on the unit.
To scroll display item.
To receive stored stations (press); store
stations (press and hold).
7