Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
Bristol
__________________________________________
Model Name
20495
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45048-01
20090121
©2009 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter Bristol 20495
Summary of Contents for Hunter Bristol 20495
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual Bristol __________________________________________ Model Name 20495 __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45048-01 20090121 ©2009 Hunter Fan Co.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not 10 • Troubleshooting ....16 use a solid-state speed control with this fan. Use only Hunter speed controls. - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard, or Angle mounting. The steps in this manual include Ceiling instructions for the Standard and the Angled Installer’s Choice...
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45048-01 • 01/21/09 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
(Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. WARNING: Fan may fall if not assembled as directed in these installation instructions. Indent Steps 3-4 – 3-5 Allen Wrench 45048-01 • 01/21/09 • Hunter Fan Company... -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 45048-01 • 01/21/09 • Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy
5-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counter clockwise until it releases from canopy. Step 5-3 Step 5-4 Canopy Step 5-5 Screw 45048-01 • 01/21/09 • Hunter Fan Company... -
Page 9: Assembling The Blades
6 • Assembling the Blades 6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Install the grommets into the blades by hand. Step 6-1 (Detail) 6-2. Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron. -
Page 10: Completing Your Installation With A Bowl Light Fixture
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate. - Page 11 Align the screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Lower Switch Housing Plug Connector Detail Housing Assembly Screw 45048-01 • 01/21/09 • Hunter Fan Company...
- Page 12 Finial maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper Light Bulbs (B10 Candelabra operation. Base 40 Watt Maximum) 45048-01 • 01/21/09 • Hunter Fan Company...
-
Page 13: Assembling The Remote Control And Mounting The Cradle
CAUTION: The remote control device complies with part 15 of the Tabs FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. Operation is subject to the following two conditions: 1. - Page 14 Note: The receiver (built into the fan) has a memory function that retains the last dipswitch code setting. The setting will not change in the event of power failure or if the power to the fan is inadvertently shut off. 45048-01 • 01/21/09 • Hunter Fan Company...
-
Page 15: Operating And Cleaning Your Ceiling
Clean painted and high-gloss blades in the same manner as the fan finish. To Change Airflow Direction Press the reversing switch on the remote while the fan is running. In cold weather, use upward air flow pattern 45048-01 • 01/21/09 • Hunter Fan Company... -
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. Memphis, Tennessee 38016 45048-01 • 01/21/09 • Hunter Fan Company...
Need help?
Do you have a question about the Bristol 20495 and is the answer not in the manual?
Questions and answers