Hunter 20174 Owner's Manual And Installation Manual
Type 3 models
Hide thumbs
Also See for 20174:
- Parts manual (2 pages) ,
- Manual de installatión y operatión (15 pages)
Table of Contents
Advertisement
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45007-01
20090611
©2009 Hunter Fan Co.
Type 3 Models
Type 3 Models
Type 3 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 20174
Summary of Contents for Hunter 20174
- Page 1 Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 45007-01 20090611 ©2009 Hunter Fan Co.
-
Page 2: Table Of Contents
Fan ....... 14 use a solid-state speed control with this fan. Use only Hunter speed 11 •... - Page 3 Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling both Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Hanger Bracket
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer Steps 2-2 – 2-4 Ceiling Peak Ceiling Peak Large Large Opening Opening 3” Screw LEFT RIGHT Step 2-3 (Angled Ceiling Only) 45007-01 • 06/11/09 • Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
(Rotate the fan until you hear the notch pop into place.) Go to 4 • Wiring the Fan. Indent WARNING: Fan may fall if not assembled as directed in these installation instructions. Steps 3-4 – 3-5 45007-01 • 06/11/09 • Hunter Fan Company... -
Page 7: Setting The Remote Transmitter And Receiver
4-3. Install the included 9-volt battery into the transmitter. CAUTION: The remote control device complies with part 15 of the FCC rules. Changes or modifications not expressly approved by Hunter Fan Company could void your authority to operate this equipment. -
Page 8: Wiring The Fan
5-7. Check each connection to make sure no bare wire or wire strands are visible. Push all wires and wire connectors, except for the white antenna wire from the receiver, back through the ceiling plate into the outlet box. 45007-01 • 06/11/09 • Hunter Fan Company... -
Page 9: Installing The Canopy And Canopy Trim
6-6. Twist canopy trim ring clockwise to secure the canopy. Should you need to remove the canopy trim ring, follow these steps: 1. Twist canopy trim ring counterclockwise until it releases from canopy. Step 6-3 Step 6-4 Step 6-5 Canopy Screw 45007-01 • 06/11/09 • Hunter Fan Company... -
Page 10: Assembling The Blades
7-1. Insert each blade into slot. Align the holes on the blade with the holes on the blade ring. 7-2. Attach the blade to the blade ring using the blade assembly screws. 7-3. Repeat for each blade. Step 7-1 Step 7-2 45007-01 • 06/11/09 • Hunter Fan Company... -
Page 11: Completing Your Installation With A Bowl Light Fixture
8 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 8-1. To attach the heat shield assembly, partially install two housing assembly screws into the switch housing mounting plate. - Page 12 8-10. Install the decorative screws into the metal rods to secure the glass bowl in place. Metal Rod Light Bulbs (B10 Candelabra- Based, 60 Watt Maximum) Decorative Screw Glass Bowl Steps 8-8 – 8-10 45007-01 • 06/11/09 • Hunter Fan Company...
-
Page 13: Operating The Remote Control And Mounting The Holder
9-4. You can mount the remote holder to any toggle switch plate with the screws already in the switch plate. Or, you can simply mount the remote holder on the wall. Steps 9-1 – 9-2 Step 9-4 45007-01 • 06/11/09 • Hunter Fan Company... - Page 14 To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Switch 45007-01 • 06/11/09 • Hunter Fan Company...
-
Page 15: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 45007-01 • 06/11/09 • Hunter Fan Company...
Need help?
Do you have a question about the 20174 and is the answer not in the manual?
Questions and answers