System - D-Link DCS-5230L User Manual

Wireless n pan/tilt network camera

Hide thumbs Also See for DCS-5230L:

Table of Contents

Section 4 - Configuration

System

This screen allows you to save and restore the camera's current configuration.

You can also reset all settings to factory default or reboot the device.

Save To Local Hard Drive: Click on the Save Configuration button to save the current

configuration to a hard drive.

Load From Local Hard Drive: To load a saved configuration, click on the Browse button

to select a configuration file from your hard drive. Then, click the Load Configuration

button to load the new configuration.

Restore To Factory Defaults: Click this button to reset all settings to their factory

defaults. If you choose to reset your settings, you will need to set up your camera again.

Reboot Device: Clicking the Reboot button will reboot your device.

D-Link DCS-5230L User Manual

Table of Contents