Change Of Specifications; Display Unit; Range Unit, Sounding Range, Data Format, Etc - Furuno CN-24 Service Manual

4. CHANGE OF SPECIFICATIONS

4.1 DISPLAY UNIT

4.1.1 Range Unit, Sounding Range, Data Format, etc.

Procedures
1) Turn off the power by pressing the PWR and OFF keys simultaneously.
2) Remove the display cover by loosening the fixing screws.
3) Change the settings of DIP switches S1, S2 and S3 on the DISP board 01P5726
referring to the figure/table below.
[S1 SETTINGS] - - For Display
No.
1 Range Unit
2
3 Data Format
4 Memory back Up
5 Menu Language
6 MT-12 Operation *1
7 Temperature
8 Operating Mode
Fig 4.1 Locations of the dip-switches S1, S2, and S3
ITEMS
RANGE UNIT
NAVS
BACK UP
CHR
PLAY
TEMP
MODE
SETTING/CONTENTS
ON M OFF FT ON
ON ON
ON CIF
ON On
ON English
ON TAPE
o
ON C
ON Normal
4-1
FA OFF
OFF OFF
OFF NMEA *2
OFF Off
OFF Japanese
OFF PANEL
o
OFF F
OFF Test
P/B