Hitachi CH 10DL Handling Instructions Manual page 15

Symptom
Toolr The tool does not trim
well.
Important notice on the batteries for the Hitachi
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used with
batteries other than these designated by us, or when
the battery is disassembled and modifi ed (such as
disassembly and replacement of cells or other internal
parts).
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Possible cause
[Shrub shear]
The blade stopped because it was used
to cut a branch whose width exceeded
the blade's cutting capacity.
NOTE
Work that will repeatedly cause the
blade to stop will eventually damage
the motor.
Remedy
Some garden trees have wood that
is very hard and may be beyond the
capacity of the tool even if it is of a width
that is within normal capacity. Use a
pair of pruning shear to remove thick
branches before starting work.
An oblique cut may also exceed the
capacity of the tool since the length of
the cut increases. Be sure to trim thick
branches at right angles.
English
15