CAC / BDP 8kW Owner's Manual page 89

5a.
5b.
STEP 6:
Install the four (4) screws (10-32 x 5/16
HHTT) to mount operating mechanism
to the back of the panel board.
STEP 7:
Install the 15 Amp 2-pole circuit breaker
in the position shown.
STEP 8:
Install generator control wiring (must be
installed in conduit). Install 5A fuse (if
required) to the terminal strip in genera-
tor and connect the control wire from the
generator.
Refer to the wiring diagram (P/N
0G4744) for further details. 2007 and
earlier generator models – refer to
0G4744 page 1, for generator models
introduced in 2008 and later- refer to
0G4744 page 2.
3