Panasonic DP-MC210 Quick Reference Manual page 19

Display
"RX Memory Full"
"Same name already
exists."
"Scanner Position Error"
"SD Card is not
inserted"
"SD Card Write
Protection"
"SD Size Over"
"Self Calibration"
"Transmit Error"
"Toner Cartridge Not
Installed"
"Tray #2 Left Cover
Open"
"Waste Toner Not
Installed"
"Waste Toner Cartridge
Not Installed"
Cause & Solution
L The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper or remove the jammed paper.
L If feature #442 is set to "Always",
– check the connection between the computer and the unit.
– check the computer is turned ON.
L If feature #448 is set to "On",
– view, print or save the received fax documents, and then erase the
unnecessary documents.
– turn the setting to "Off". The fax documents stored in memory will be
printed automatically.
– set feature #449 to "On", and then print the received fax documents.
L The same file name already exists in the SD card folder. See the other
displayed message instructions to continue saving the data.
L There is something wrong with the scanner position. Turn the power switch
OFF, then ON. If the problem cannot be solved, contact our service
personnel.
L The SD card has been removed from the unit. Reinsert it.
L There is no SD card inserted in the unit. Insert one.
L The write-protect switch of the SD card is in the lock position. Unlock the
switch to allow write access.
L There is no space to save new data on the SD card. Erase unnecessary
data.
L The unit is changing the color calibration. Wait for a while.
L A transmission error occurred. Try again.
L The toner cartridge is not installed. Install it.
L The left cover of the optional input tray is open. Close it.
L The waste toner cartridge is not installed. Install it.
Detailed operating instructions are on the CD-ROM.
3. Help
19