Connecting Rods - Tecumseh VLV Technician's Handbook

Connecting Rods

Do not attempt to straighten bent
CAUTION
connecting rods. Doing so will
damage the cylinder and piston beyond repair.
Match marks on connecting rods must always align and
must face outward toward the mechanic when installed
in an engine.
A new piston can be installed on the connecting rod in
either direction.
If the old piston is reused, install the piston to the
connecting rod so that the piston will be in the same
position when reinstalled in the engine.
If it is necessary to replace the connecting rod be sure
to mark the valve side of the piston.
8-2
Match Marks
Match Marks
695578