To Service Air Cleaner - Tecumseh VLV Technician's Handbook

To Service Air Cleaner

1. Loosen cover screw (A).
2. Swing cover down and remove from hinge (B).
3. Pull foam pre-filter out of air cleaner body
(if equipped with pre-filter).
4. Pull air filter out of air cleaner body.
5. Clean air cleaner cover and body.
6. Install a new paper filter (part no. 36046) (C).
7. Clean and install pre-filter (if so equipped).
8. Reinstall cover to air cleaner body.
Be sure hinge is assembled properly.
9. Swing cover up and tighten cover screw.
(Do not over tighten).
2-2
A
Pre-Filter
B
C
695578