Hookups - Sony DVP-NS500V Service Manual

Hookups

Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
A
(yellow)
INPUT
Audio/video
cord (supplied)
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
(yellow)
L C E N T E R R – AUDIO 1 – L VIDEO 1
1
2
COAXIAL OPTICAL
R – AUDIO 2 – L VIDEO 2
PCM/DTS/ R
DOLBY DIGITAL
FRONT REAR W O O F E R
S VIDEO
DIGITAL OUT 5.1CH OUTPUT LINE OUT OUT
INPUT
S VIDEO
S VIDEO cord
TV, projector, or AV
B
(not supplied)
amplifier (receiver)
l : Signal flow
18
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select a connection
Select one of the following connections,
Connection Components to be connected
A (page 21) TV (stereo)
B (page 22) AV amplifier (receiver) having 5.1ch input jacks
• 4 speakers
(front L and R, rear L and R)
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
B (page 22) AV amplifier (receiver) having a Dolby
input jack
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
(page 24) Stereo amplifier (receiver)
C
(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers
(front L and R)
(page 24) MD deck/DAT deck
C
(page 25) AV amplifier (receiver) with a Dolby Surround (Pro Logic) decoder
D
(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers
(front L and R, and rear (monaural))
• 6 speakers
(front L and R, center, rear L and R, subwoofer)
z
To enjoy SACD Multi or 96kHz/24bit sound, use the connection
* Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide
patents issues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
© 1996 Digital Theater Systems, Inc. All rights reserved.
20
COMPONENT
Component video
VIDEO IN
cord (not supplied)
Y
(green)
P
B
(blue)
P
R
(red)
TV, projector, or AV
amplifier (receiver)
(green) (blue) (red)
SACD/DVD player
Y
P B
P
R
COMPONENT
VIDEO OUT
through .
A D
* **
Digital or DTS decoder and a digital
B .
A
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 21).
B
If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
C
If you are connecting to a monitor, projector, or AV amplifier (receiver) having
C
component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using the component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will enjoy
accurate color reproduction and high quality images.
Green
Blue
Red
Note
Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear image
on the TV screen.
SACD/DVD player
Connecting to your TV
A
This connection will use your TV speakers for sound.
xRecommended surround sound effects for this connection
•TVS DYNAMIC (page 55)
•TVS WIDE (page 55)
SACD/DVD player
L C E N T E R R – AUDIO 1 – L VIDEO 1
COAXIAL OPTICAL
R – AUDIO 2 – L VIDEO 2
PCM/DTS/ R
DOLBY DIGITAL
FRONT REAR W O O F E R
DIGITAL OUT 5.1CH OUTPUT LINE OUT
A
R – AUDIO 1 – L VIDEO 1
R – AUDIO 2 – L VIDEO 2
LINE OUT
l : Signal flow
The yellow plug is used for video signals (page 18).
1-4
Yellow (Video)
White (L)
Red (R)
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly
Y
1
P
2 B
P
R
S VIDEO COMPONENT
OUT
VIDEO OUT
(yellow) (yellow)
(white)
(white)
(red)
(red)
Audio/video cord
(supplied)
to audio input
19
TV
continued
21