Printed Wiring Boards And Schematic Diagrams - Sony DVP-NS500V Service Manual

PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

THIS NOTE IS COMMON FOR PRINTED WIRING
BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary mote is printed
in each block.)
For printed wiring boards:
• X : indicates a lead wire mounted on the component
side.
• x : indicates a lead wire mounted on the printed side.
• a : Through hole.
• b : Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side: Parts on the pattern face side seen from
(Side A) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(Side B) the parts face are indicated.
DVP-NS500V/NS700V
SECTION 4
For schematic diagram:
• Caution when replacing chip parts.
New parts must be attached after removal of chip.
Be careful not to heat the minus side of tantalum capacitor,
because it is damaged by the heat.
• All resistors are in ohms, 1 / W (Chip resistors :
4
less otherwise specified.
kΩ : 1000Ω, MΩ : 1000kΩ.
• All capacitors are in µF unless otherwise noted. pF : µµF
50V or less are not indicated except for electrolytics and
tantalums.
• All variable and adjustable resistors have characteristic curve
B, unless otherwise noted.
2 : nonflammable resistor.
•
• 5 : fusible resistor.
• C : panel designation.
• f : internal component.
• C : adjustment for repair.
• U : B+ Line.
• V : B– Line.
• Circled numbers refer to waveforms.
• Voltages are dc between measurement point.
• Readings are taken with a color-bar signal on DVD refer-
ence disc and when playing CD reference disc.
• Readings are taken with a digital multimeter (DC 10MΩ).
• Voltage variations may be noted due to normal production
tolerances.
Note: Note:
The components identi- Les composants identifiés par
une marque 0 sont critiques
fied by mark 0 or dotted
line with mark 0 are criti- pour la sécurité.
cal for safety. Ne les remplacer que par une
pièce por tant le numéro
Replace only with part
spécifié.
number specified.
When indicating parts by reference
number, please include the board
name.
• Abbreviation
AUS : Australian
CH : Chinese
CND : Canadian
E12 : 220-240 V AC Area in E
EA : Saudi Arabia
HK : Hong Kong
KR : Korea
ME : Middle East
RUS : Russian
SP : Singapore
TW : Taiwan
• Description about model name
DPX14xxBM
Name of production country
M : Malaysia
X : Mexico
Color of set
B : Black
H : Titanium gray
4-1
1 / W) un-
10
DVP-NS500V/NS700V