Sony DVP-NS500V Service Manual page 13

SACD/DVD player
L C E N T E R R – AUDIO 1 – L VIDEO 1
COAXIAL OPTICAL
R – AUDIO 2 – L VIDEO 2
PCM/DTS/ R
DOLBY DIGITAL FRONT REAR W O O F E R
DIGITAL OUT 5.1CH OUTPUT LINE OUT
Coaxial digital
D-2
cord (not supplied)
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
Amplifier (receiver) with Dolby Surround decoder
Rear Rear
(L) (R)
Subwoofer
Center
l: Signal flow
∗When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
26
4 Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
5 Press X/x to select a language.
The player uses the language selected here to display the menu and subtitles as well.
6 Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
7 Press X/x to select the item.
TV Type
4:3 standard TV
A wide-screen TV or a 4:3 standard TV
with a wide-screen mode
8 Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver)
appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
9 Press X/x to select the item, then press ENTER.
Audio Cord Connecting Type
C-1 D-1
B-2 C-2 D-2
or both and
B-1 B-1 B-2
A
28
1 Y
2 P
B
P R
S VIDEO COMPONENT
OUT VIDEO OUT
Stereo
D-1
audio cord
(not supplied)
(red)
R – AUDIO 1 – L VIDEO 1
(white)
or or
R – AUDIO 2 – L VIDEO 2
LINE OUT
(white) (red)
to audio input
[Speakers]
Front
(L)
Rear*
(mono)
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
You select Page
4:3 LETTER BOX or 4:3 PAN 74
SCAN
16:9 74
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
You select
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). When you turn off the power of your amplifier (receiver), the menu setting for the
player such as Playback Memory may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
PROGRESSIVE SCAN
POWER
ON OFF
BNR SURROUND
R
POWER
Front
(R)
1 Turn on the TV.
2 Switch the input selector on the TV to the player.
3 Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this message
does not appear, select "QUICK" under "SETUP" in the Control Menu to run Quick Setup
(page 72).
• When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
• When "DIGITAL OUTPUT" or "DIGITAL & 5.1CH OUTPUT" is selected, the Setup
Display for "DOLBY DIGITAL" appears.
q; Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 22 to 25 (
through ).
D
Audio Cord Connection Type
C-2 D-2
B-2
qa Press ENTER.
"DTS" is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 22 to 25 (
through ).
D
Audio Cord Connection Type
C-2 D-2
B-2
qd Press ENTER.
• When "DIGITAL OUTPUT" is selected in Step 8, Quick Setup is finished. All
connections and setup operations are complete.
• When "DIGITAL & 5.1CH OUTPUT" is selected in Step 8, the Setup Display for
"SPEAKER SETUP" appears.
1-6
1 2 3
ENTER
4 5 6
7 8 9
0
JOG
PUSH
ENTER TITLE
DVD MENU
RETURN
DISPLAY
./> X/x
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
AUDIO FILTER: SHARP
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: D-PCM
48kHz/96kHz PCM: DOLBY DIGITAL
You select Page
D-PCM 78
DOLBY DIGITAL (only if the 78
amplifier (receiver) has a Dolby
Digital decoder)
AUDIO SETUP
AUDIO ATT: OFF
AUDIO DRC: STANDARD
AUDIO FILTER: SHARP
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: D-PCM
48kHz/96kHz PCM: D-PCM
DTS
You select Page
D-PCM 78
DTS (only if the amplifier 78
(receiver) has a DTS decoder)
[/1
./>
X/x
ENTER
continued
27
B
B
continued
29