90 | Wireless
Figure 77: WLAN Network Security Dialog Box
8 If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch Connect.
9 If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, PWD, LEAP or FAST.
•
Touch the Phase 2 authentication drop-down list and select an authentication method.
•
If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
•
If required, touch User certificate and select a user certificate. Note: User certificates are installed using the
Location & security settings.
•
If required, in the Identity text box, enter the username credentials.
•
If desired, in the Anonymous identity text box, enter an anonymous identity username.
•
If required, in the Password text box, enter the password for then given identity.
10
Note: By default, the network Proxy is set to None and the IP settings is set to DHCP. See
for a Proxy Server on page 91
to Use a Static IP Address on page 92
Touch Connect.
11 Touch
.
October 2014 | MN001120A01-A
for setting connection to a proxy server and see
for setting the device to use a static IP address.
Configuring
Configuring the Device