Enabling Ptt Communication; Selecting A Talk Group; Ptt Communication - Symbol TC70 User Manual

74 | Applications
Item
Enable/Disable
Switch
Notification Icons
Indicates the current state of the PTT Express Voice client.
Table 11: PTT Express Default User Interface Descriptions
Status Icon

Enabling PTT Communication

Procedure:
1 Touch
.
2
Touch .
3 Slide the Enable/Disable Switch to the ON position. The button changes to an ON button.

Selecting a Talk Group

One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be enabled at a time
on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.

PTT Communication

Note: This section describes the default PTT Express client configuration. See the PTT Express V1.2 User
Guide for detailed information on using the client.
PTT communication may be established as a Group Call. When PTT Express is enabled, the PTT button on the left
side of the device is assigned for PTT communication. When the Wired Headset is used, Group Calls can also be
initiated using the headset Talk button.
October 2014 | MN001120A01-A
Description
Turns the PTT service on and off.
Description
Indicates that PTT Express Voice client is disabled.
Indicates that PTT Express Voice client is enabled but not connected to a WLAN.
Indicates that PTT Express Voice client is enabled, connected to a WLAN and listening on
the Talk Group indicated by the number next to the icon.
Indicates that PTT Express Voice client is enabled, connected to a WLAN and communicat-
ing on the Talk Group indicated by the number next to the icon.
Indicates that PTT Express Voice client is enabled, connected to a WLAN and in a private
response.
Indicates that PTT Express Voice client is enabled and muted.
Indicates that the PTT Express Voice client is enabled but it is not able to communicate due
to a VoIP telephony call is in progress.