Cisco Integrated Management Controller (Cimc); Configuring Cimc - Cisco SNS 3415 Installing Manual

Chapter 8 Installing the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances
3
4
Continue with the "Connecting and Powering on Cisco SNS-3415/3495 Appliance".
Step 5

Cisco Integrated Management Controller (CIMC)

You can monitor the server inventory, health, and system event logs by using the built-in Cisco Integrated
Management Controller 1.4.7a (CIMC) GUI or CLI interfaces. See the user documentation for your
firmware release at the following URL:
http://www.cisco.com/en/US/products/ps10739/products_installation_and_configuration_guides_list.html

Configuring CIMC

You can perform all operations on the Cisco SNS-3415 or Cisco SNS-3495 appliance through the CIMC.
To do this, you must first configure an IP address and IP gateway to access the CIMC from a web-based
browser.
Plug in the power cord.
Step 1
Press the Power button to boot the server.
Step 2
Flange on rear of right mounting
bracket
Flange on rear of outer right slide rail
Installation and Upgrade Guide for Cisco Secure Access Control System 5.6
Cisco Integrated Management Controller (CIMC)
7 Outer CMA arm attachment clip
8-5