Table of Contents
Advertisement
1. Application Object
This instruction is for the application to the LCD TV.
2. Adjustment
2.1 Auto Gain/Offset adjustment
2.1.1 Adjustment preparation
1) Conduct Heat Run with the White Pattern for more than 30
minutes.
2) Connect the signals of Pattern Generator to DVI-I Jack of
LCD TV.
2.1.2 Auto Gain/Offset adjustment
1) Use the Pattern Generator (801GF, VG819) to authorize
XGA (1024 X 768) for resolution and 16 gray scale signals
for patterns. Or authorize 16 gray scale (11 gray scale)
signals in accordance with VG819.
2) Press the IN-START Key to convert to the adjustment
mode using the adjustment (SVC) remote controller, and
press VOL+ Key at the AutoGain menu.
3) Once the adjustment is completed, press the Enter Key to
save and finish the adjustment
2.2 EDID (The Extended Display Identification Data) setting
1) Connect D-Sub to DVI-I Cable with DVI-I Jack.
2) Set the input mode of the Set to PC.
3) Select the OPT3 from the OSD menu and set Analog or
Digital for DDC data selection.
4) Select Analog for analog data, and Digital for digital data.
5) Connect the DDC automation equipment and write the
DDC data.
ADJUSTMENT INSTRUCTION
2.2.1 EDID DATA
[DDC DATA Analog]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00
00 FF FF FF FF FF FF 00 1E 6D 39 75 01 01 01 01
10
0C 0E 01 03 18 46 2B 78 EE E8 AA A1 57 49 9C 25
20
10 48 4B AB 8C 00 45 4F 61 4F 81 CF 01 01 01 01
30
01 01 01 01 01 01 40 1F 00 90 51 00 1B 30 40 88
40
37 00 BC AE 21 00 00 1C 00 00 00 FD 00 32 4B 1F
50
3C 0A 00 0A 20 20 20 20 20 20 00 00 00 FC 00 52
60
5A 33 30 4C 5A 35 30 0A 20 20 20 20 00 00 00 FC
70
00 0A 20 20 20 20 20 20 20 20 20 20 20 20 00 B0
[DDC DATA Digital]
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00
00 FF FF FF FF FF FF 00 1E 6D 3A 75 01 01 01 01
10
0C 0E 01 03 98 46 2B 96 EE E8 AA A1 57 49 9C 25
20
10 48 4B BF EE 00 31 40 3B CA 45 40 61 40 81 C0
30
81 CF 01 01 01 01 40 1F 00 90 51 00 1B 30 40 88
40
37 00 BC AE 21 00 00 1C 00 00 00 FD 00 32 4B 1F
50
3C 0A 00 0A 20 20 20 20 20 20 00 00 00 FC 00 52
60
5A 33 30 4C 5A 35 30 0A 20 20 20 20 00 00 00 FC
70
00 0A 20 20 20 20 20 20 20 20 20 20 20 20 00 08
Advertisement
Table of Contents
