Acom JW-1 Owner's Manual page 11

16. Use the SET key to toggle the value to its desired setting
17. Press the
18. The display should read UP-
19. Press the SET
User
Parameter
This controls the update speed on the display. Set
to 0 will make the display update the weight most
UP-1
quickly; whereas a setting of 3 will update most
slowly.
A setting of 1 corresponds to Average Weighing; a
UP-2
setting of 0 sets the balance to Normal Weighing.
A setting of 1 corresponds to disabling Auto-Zero
UP-3
tracking; a setting of 0 sets the enables Auto-Zero
Tracking.
A setting of 1 corresponds to Handshake RS-232
UP-4
mode; a setting of 0 sets Stream RS-232 mode.
Average Weighing: This mode is used whenever you need to weigh
items that may be in motion: liquids, livestock, etc.
Auto-Zero Tracking: You will want to disable this feature when the
items that you weigh most often are very near zero.
Stream Mode: When you use the RS-232 serial port in this mode, the
balance will automatically transmit the displayed data whenever the
balance becomes stable.
Handshake Mode: When you use the RS-232 serial port in this mode,
the balance will only transmit the displayed data whenever the balance
is polled. This is usually done by connecting the balance to a PC.
key to store the value
key to return to Operation mode (normal use)
User Parameter Specifications
Definition
Range
0~3
0~1
0~1
0~1
9