Table of Contents
Advertisement
Quick Disconnect (QD) Connector
Latitude fully rugged products come equipped with receptacles for QD (Quick-
Disconnect) connectors at the corners. These receptacles allow the connection of
optional accessories such as shoulder straps.
Installing a QD connector
1.
Align the QD connector to the receptacle on the corner of the computer.
2.
Insert the connector into the receptacle while holding the button pressed.
3.
Press and hold the button on top of the QD connector.
4.
Release the button after the connector is seated in the receptacle to secure it.
Removing a QD connector
1.
Press and hold the button on top of the QD connector.
2.
Pull the connector out of the receptacle while holding the button pressed.
6
21
Advertisement
Table of Contents
