V A T MX1260 User Manual Twelve Channel Bridgeable Amplifier with 4 Mode Buss System Phoenix Gold International, Inc. • 9300 North Decatur Street • Portland, Oregon 97203 Tel: 503.286.9300 Fax: 503.978.3302...
AC Mains Fuse not operate normally, or has been dropped. MX1260 115-117VAC - 10A 250V Slo-Blo WARNING: To reduce the risk of fire or electric shock, do not MX1260 230-240VAC - 5A 250V Slo-Blo expose this apparatus to rain or moisture.
Page 3
Twelve Channel Bridgeable Amplifier Congratulations on your purchase of the Innovative Home MX1260. Please take a few moments to read this entire manual, and be sure to retain this document for future reference. Please read and observe all safety instructions detailed on page two (2).
Page 4
There are a total of 14 RCA inputs and 2 RCA outputs on the to the other channels. At the top of the rear panel, there are 12 back panel of the MX1260. There are 12 independent single black knobs which corre-...
Page 5
Bridging channels combines two channels to create one more Each channel has a pair of multi-way binding post. These are powerful channel. The MX1260 has twelve channels rated at 60 the red and black screw posts at the lower rear of the amplifier.
Page 6
With the MX1260 there is no problem. Simply provide a stereo input to the Audio Buss input on the rear of the MX1260, select Any unused pair of channels can be used to carry 2 Channel a channel from the 12 available, and set the Buss Switch for that information from the processor to another zone.
Specifications Power Bandwidth 20Hz-20kHz: 60W per Channel into 8 ohm loads with less than 0.1% THD+N 100W per Channel into 4 ohm loads with less than 0.1% THD+N 180W, 2 Channels bridged into 8 ohms with less than 0.2% THD+N 45W per CH., all CH.