Client Setup - Secube AT-A1600 User Manual

User's Manual

CLIENT SETUP

Highlight the CLIENT SETUP in the main menu and press the enter button. The following CLIENT SETUP
– CONNECT screen will appear.
Figure – CLIENT SETUP – CONNECT. Figure – CLIENT SETUP-USER ACCOUNT(1).
Enter the TCP Port for client connection. The default SMS port (TCP) is 7000 and 80 for Web Port (TCP).
You can select the remote restart or remote configuration by highlighting the side boxes and press the enter
button.
Max transfer speed can be set from 50kbps up to 100Mbps.
Select the user account by highlighting the USER ACCOUNT and pressing the enter button. Refer to the
Figure 96.
The DVR supports 2 admin Ids and 4 user Ids. Playback, live, ptz can be set for each user.
You can create new accounts by highlighting ADD button and pressing the enter button. Type the new
account by using the virtual keyboard. When saving a new account, the password screen will appear. Type
the password for the new account. The confirm screen will appear. Retype the password. Refer to the
Figure 97 and 98.
Figure – CLIENT SETUP-USER ACCOUNT(2). Figure CLIENT SETUP-USER ACCOUNT(3).
–
88