Secube AT-A1600 User Manual page 58

User's Manual
DISK MANAGER
Select the second page, HDD SETUP – OVERWRITE and the following screen will appear.
Figure – HDD SETUP – OVERWRITE(1) Figure – HDD SETUP – OVERWRITE(2)
You can turn on or off the overwriting option by selecting the box beside HDD OVERWRITE.
NOTE: When turning off the overwriting, your DVR will stop recording when the disk is full.
When turning off the overwriting, the boxes USED SPACE will be activated.
You can set up the HDD usage by USED SPACE. Refer to the screens below.
Figure – HDD SETUP – OVERWRITE(3).
NOTE: When setting up the USED SPACE to 80%, your DVR will stop recording at 80%. Your DVR
will check the settings of USED SPACE automatically and record as much as possible.
Your DVR has 3 different warning methods when the disk is full but the DISK FULL WARNING must be
turned on in the WARNING METHOD menu.
You can assign an alarm out by selecting the box beside DISK FULL ALARM and turn on the buzzer or
OSD (On Screen Display) warning message.
58