SYSTEM ENVIRONMENT
Figure – SYS. ENVR
If CHECK ENABLE is on, HDD status and FAN SPEED can be checked.
It is divided into check interval, temp.thresh and warning
HDD temperature and Fan Speed can be checked according to the configured time interval and warning
message can be set to popup, buzzer and off.
Clicking CHECK S.M.A.R.T NOW checks the S.M.A.R.T status.
Figure – S.M.A.R.T. INFORMATION(1)
HDD information shows capacity, bad sector, temp, S.M.A.R.T status of the HDD.
Going into detail shows you more detailed information about the HDD.
60
Figure – S.M.A.R.T CHECK
Figure – S.M.A.R.T. INGORMATION(2)
Digital Video Recorder