Checking Functional Members; Pilot Lamp And Voltmeter; Ac Receptacles - Robin America RGV12100 Service Manual

8. CHECKING FUNCTIONAL MEMBERS

8-1 PILOT LAMP and VOLTMETER

Check the pilot lamp and the voltmeter if it is
turned on by applying specific voltage.
Pilot lamp and voltmeter cannot be checked
with circuit tester because its resistance is
PILOT LAMP
too large.

8-2 AC RECEPTACLES

Using a circuit tester, check continuity
between the two terminals at the rear of the
AC receptacles while the receptacle is
mounted on the control panel. When continu-
ity is found between the output terminals of
the receptacle with a wire connected across
these terminals, the AC receptacle is normal.
When the wire is removed and no continuity
is found between these terminals, the recep-
tacles are also normal.
27