Panasonic KX-HCM10 Operating Instructions Manual page 7

Notes
• Dialing numbers (1), (3), (7) and (9) are displayed in ascending order. The links
for fifth to eighth preset images are displayed only with their preset names and
not with dialing numbers.
• KX-HCM10, KX-HCM230, KX-HCM250 and KX-HCM270 cannot use Tele and
Wide.
• KX-HCM8 can control only Refresh and Resolution.
• Some mobile phones are not compatible with Panasonic Network Cameras.
Some phones may allow viewing only on port number 80, and some may not
support password authentication. Refer to the Network Camera Technical
Support Site at http://panasonic.co.jp/pcc/en/ for a list of mobile phone
models, and the compatibility level which has been verified with the Panasonic
Network Camera.
• Some mobile phones cannot display 320 x 240 resolution depending on their
models. Refer to the Network Camera Technical Support Site at
http://panasonic.co.jp/pcc/en for the models that Panasonic has verified
with the Network Camera.
• Some mobile phones display images not at the specified resolution but at a
decreased size.
• When Pan/Tilt/Zoom operation reaches the end, the keypad number and the
character disappear.
"(4)L" disappears.
Operating Instructions
7