Viewing Still Images On Your Mobile Phone - Panasonic KX-HCM10 Operating Instructions Manual

Operating Instructions

Viewing still images on your mobile phone

A compatible mobile phone allows you to view still images over the Internet as well
as control the motion and zoom settings of the camera (depends on model).
Enter "http://IP address (or URL):Port No./mobile" on a mobile phone and press
[OK]. (e.g., http://bob.viewnetcam.com:60001/mobile would show a camera
connected on port 60001.) A still image appears. Motion images cannot be
displayed.
(When the port number is set to 80 [default], it is not required.)
6
On certain compatible phones, the keypad has been
linked to the hyperlinks on the web page.
Pressing 2, 4, 6 or 8 on some phones allows you to
pan and tilt a Network Camera in four directions:
Left, Up, Down and Right.
Tele button ( ) zooms in, and Wide button (#) zooms out
(KX-HCM280 only).
Pressing 5 will refresh the image.
160x120 resolution is displayed at the first access.
Pressing 0 switches the resolution to 320x240.
Added
Pressing 1, 3, 7 or 9 on the keypad allows you to use
the first four registered preset positions (Preset 1, 2, 3
and 4).
Registered presets 5-8 are available by activating the lin
on the mobile phone screen.