Common Errors In Ssl Setup - HP procurve switch 2600 series Access Security Manual

Common Errors in SSL setup

Error During
Generating host certificate on CLI
Enabling SSL on the CLI or Web browser interface
Unable to Connect with SSL
Configuring Secure Socket Layer (SSL)

Common Errors in SSL setup

Possible Cause
You have not generated a certificate
key. (Refer to "CLI commands used to
generate a Server Host Certificate" o n
page 6-10.)
You have not generated a host
certificate. (Refer to "Generate a Self-
Signed Host Certificate with the Web
browser interface" on page 6-13.)
You may be using a reserved TCP po rt.
(Refer to "Note on Port Number" on
page 6-20.)
You may not have SSL enabled (Refer
to "3. Enabling SSL on the Switch a nd
Anticipating SSL Browser Contact
Behavior" on page 6-17.)
Your browser may not support SSLv3
or TLSv1 or it may be disabled. (Refer
to the documentation provided for
your browser.)
6-21