HP procurve switch 2600 series Access Security Manual page 195

Using the CLI To Display Port Security Settings.
Syntax:
show port-security
show port-security [e] <port number>
show port-security [e] [<port number>-<port number]. . .[,<port number>]
Without port parameters,
for all ports on a switch. For example:
Figure 8-2. Example Port Security Listing (Ports A7 and A8 Show the Default
Setting)
With port numbers included in the command, show port-security displays Learn
Mode, Address Limit, (alarm) Action, and Authorized Addresses for the spec
ified ports on a switch. The following example lists the full port security
configuration for a single port:
Figure 8-3. Example of the Port Security Configuration Display for a Single Port
Configuring and Monitoring Port Security
Port Security Command Options and Operation
displays operating control settings
show port-security
8-11