Table of Contents
Advertisement
*9
Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*10 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company "call waiting" service by having
the recall/flash time set at "100 msec.", and then follow your service provider/telephone
company "call waiting" instructions to operate this service. (for Australia)
*12 For New Zealand
*13 For Australia
*14 To prevent other users from joining your conversations with outside callers, turn this feature
on.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
(page 15).
1
(middle soft key) #720
2
MbN: Select the desired alarm option. a
"Off"
Turns alarm off. Go to step 6.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired date and month. a
4
Set the desired time. a
5
MbN: Select the desired alarm tone. a
R We recommend selecting a different
ringer tone from the one used for
outside calls.
6
a M
R When the alarm is set,
Note:
R To stop the alarm, press M
the handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Using the phonebook's category feature
(page 20), you can also select categories of
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R Set the date and time beforehand
(page 15).
R We recommend turning the base unit ringer
off (page 25) in addition to turning the night
mode on.
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
(middle soft key) #238
Programming
N
is displayed.
N or place
27
Advertisement
Table of Contents
