Safety - Boss Infinity Operator, Maintenance And Parts Manual

ALL UNITS ARE SHIPPED WITH A DETAILED OPERATORS AND PARTS
MANUAL. THIS MANUAL CONTAINS VITAL INFORMATION FOR THE SAFE
USE AND EFFICIENT OPERATION OF THIS UNIT. CAREFULLY READ
THE OPERATORS MANUAL BEFORE STARTING THE UNIT. FAILURE TO
ADHERE TO THE INSTRUCTIONS COULD RESULT IN SERIOUS BODILY
INJURY OR PROPERTY DAMAGE.
Safety is basically common sense. While there are standard safety rules, each situation has its own
peculiarities that cannot always be covered by rules. Therefore with your experience and common
sense, you are in a position to ensure your safety. Lack of attention to safety can result in:
accidents, personal injury, reduction of efficiency and worst of all - Loss of Life. Watch for safety
hazards. Correct them promptly. Use the following safety precautions as a general guide to safe
operation:
Do not attempt to remove any compressor parts without first relieving the entire system of
pressure.
Do not attempt to service any part while machine is operating.
CHECK THE COMPRESSOR SUMP OIL LEVEL ONLY WHEN THE COMPRESSOR
IS NOT OPERATING AND SYSTEM IS COMPLETELY RELIEVED OF PRESSURE.
OPEN SERVICE VALVE TO ENSURE RELIEF OF SYSTEM AIR PRESSURE WHEN
PERFORMING MAINTENANCE ON COMPRESSOR AIR/OIL SYSTEM. FAILURE
TO COMPLY WITH THIS WARNING MAY CAUSE DAMAGE TO PROPERTY
AND SERIOUS BODILY HARM.
Do not operate the compressor at pressure(s) or speed in excess of its rating as indicated in
"Compressor Specifications".
Periodically check all safety devices for proper operation.
Do not play with compressed air. Pressurized air can cause serious injury to personnel.
Exercise cleanliness during maintenance and when making repairs by covering parts and exposed
openings.

SAFETY

WARNING
AIR COMPRESSOR SAFETY PRECAUTIONS
DANGER
7